WCL Error codes

[Mike Petrichenko]

  WCL_ERROR_SUCCESS = 0;

  WCL_ERROR_BASE = $8000F000;
 
  WCL_ERROR_API_NOT_LOADED = WCL_ERROR_BASE + 1;
  WCL_ERROR_TRANSPORT_NOT_AVAILABLE = WCL_ERROR_BASE + 2;
  WCL_ERROR_BLUETOOTH_API_NOT_AVAILABLE = WCL_ERROR_BASE + 3;
  WCL_ERROR_INVALID_ADDRESS = WCL_ERROR_BASE + 4;
  WCL_ERROR_INVALID_ARGUMENT = WCL_ERROR_BASE + 5;
  WCL_ERROR_INDEX_OUT_OF_RANGE = WCL_ERROR_BASE + 6;
  WCL_ERROR_OPERATION_IN_PROGRESS = WCL_ERROR_BASE + 7;
  WCL_ERROR_INVALID_BLUETOOTH_API = WCL_ERROR_BASE + 8;
  WCL_ERROR_RADIO_ADDRESS_READ_ERROR = WCL_ERROR_BASE + 9;
  WCL_ERROR_NOT_IMPLEMENTED = WCL_ERROR_BASE + 10;
  WCL_ERROR_FEATURE_NOT_SUPPORTED = WCL_ERROR_BASE + 11;
  WCL_ERROR_RADIO_CONNECTABLE_READ_ERROR = WCL_ERROR_BASE + 12;
  WCL_ERROR_RADIO_DISCOVERABLE_READ_ERROR = WCL_ERROR_BASE + 13;
  WCL_ERROR_GET_RADIO_HANDLE = WCL_ERROR_BASE + 14;
  WCL_ERROR_RADIO_NAME_READ_ERROR = WCL_ERROR_BASE + 15;
  WCL_ERROR_RADIO_CONNECTABLE_WRITE_ERROR = WCL_ERROR_BASE + 16;
  WCL_ERROR_RADIO_DISCOVERABLE_WRITE_ERROR = WCL_ERROR_BASE + 17;
  WCL_ERROR_RADIO_NAME_WRITE_ERROR = WCL_ERROR_BASE + 18;
  WCL_ERROR_INVALID_CHANNEL_NUMBER = WCL_ERROR_BASE + 19;
  WCL_ERROR_RADIO_REQUIRED = WCL_ERROR_BASE + 20;
  WCL_ERROR_REMOTE_CLASS_OF_DEVICE_READ_ERROR = WCL_ERROR_BASE + 21;
  WCL_ERROR_REMOTE_DEVICE_NAME_READ_ERROR = WCL_ERROR_BASE + 22;
  WCL_ERROR_PAIRED_STATUS_READ_ERROR = WCL_ERROR_BASE + 23;
  WCL_ERROR_ENUM_SERVICES = WCL_ERROR_BASE + 24;
  WCL_ERROR_DEVICE_ALREADY_PAIRED = WCL_ERROR_BASE + 25;
  WCL_ERROR_AUTHENTICATION_FAILED = WCL_ERROR_BASE + 26;
  WCL_ERROR_UNABLE_PAIR = WCL_ERROR_BASE + 27;
  WCL_ERROR_CANCELLED_BY_USER = WCL_ERROR_BASE + 28;
  WCL_ERROR_ACCESS_DENIED = WCL_ERROR_BASE + 29;
  WCL_ERROR_UNABLE_UNPAIR = WCL_ERROR_BASE + 30;
  WCL_ERROR_CONNECTION_ACTIVE = WCL_ERROR_BASE + 31;
  WCL_ERROR_INVALID_TIMEOUT = WCL_ERROR_BASE + 32;
  WCL_ERROR_INVALID_BUFFER = WCL_ERROR_BASE + 33;
  WCL_ERROR_INVALID_BAUDRATE_VALUE = WCL_ERROR_BASE + 34;
  WCL_ERROR_INVALID_SERIAL_PORT_NUMBER = WCL_ERROR_BASE + 35;
  WCL_ERROR_INVALID_CHANNEL = WCL_ERROR_BASE + 36;
  WCL_ERROR_INVALID_ENCRYPTION_FLAG = WCL_ERROR_BASE + 37;
  WCL_ERROR_INVALID_IRDA_SERVICE = WCL_ERROR_BASE + 38;
  WCL_ERROR_INVALID_PACKET_SIZE = WCL_ERROR_BASE + 39;
  WCL_ERROR_CONNECTION_EXISTS = WCL_ERROR_BASE + 40;
  WCL_ERROR_NOT_CONNECTED = WCL_ERROR_BASE + 41;
  WCL_ERROR_INVALID_TRANSPORT = WCL_ERROR_BASE + 42;
  WCL_ERROR_UNABLE_CONNECT = WCL_ERROR_BASE + 43;
  WCL_ERROR_READ_ERROR = WCL_ERROR_BASE + 44;
  WCL_ERROR_WRITE_ERROR = WCL_ERROR_BASE + 45;
  WCL_ERROR_SERVICE_NOT_FOUND = WCL_ERROR_BASE + 46;
  WCL_ERROR_TIMEOUT = WCL_ERROR_BASE + 47;
  WCL_ERROR_OBEX_SESSION_REJECTED = WCL_ERROR_BASE + 48;
  WCL_ERROR_OBEX_SESSION_CANCELLED = WCL_ERROR_BASE + 49;
  WCL_ERROR_OBEX_SESSION_ERROR = WCL_ERROR_BASE + 50;
  WCL_ERROR_FILE_NOT_FOUND = WCL_ERROR_BASE + 51;
  WCL_ERROR_UNABLE_OPEN_FILE = WCL_ERROR_BASE + 52;
  WCL_ERROR_OBEX_REJECTED = WCL_ERROR_BASE + 53;
  WCL_ERROR_NO_ACTIVE_OPERATION = WCL_ERROR_BASE + 54;
  WCL_ERROR_UNABLE_GET_SIGNAL_LEVEL = WCL_ERROR_BASE + 55;
  WCL_ERROR_DEMO = WCL_ERROR_BASE + 56;
  WCL_ERROR_UNABLE_REGISTER_NOTIFICATION = WCL_ERROR_BASE + 57;
  WCL_ERROR_INVALID_IRMC_OBJECT = WCL_ERROR_BASE + 58;
  WCL_ERROR_LICENSE = WCL_ERROR_BASE + 59;
  WCL_ERROR_AUTHENTICATOR_ACTIVE = WCL_ERROR_BASE + 60;
  WCL_ERROR_AUTHENTICATOR_ALREADY_STARTED = WCL_ERROR_BASE + 61;
  WCL_ERROR_UNABLE_INSTALL_AUTHENTICATION = WCL_ERROR_BASE + 62;

[servel333]

Just a note:

Visual Basic 2005 (.NET, Visual Studio 2005) appears to interpret WCL_ERROR_BASE as -2147422208. When exceptions are thrown, they are negative. I'm not sure if this is the original intention but thats the result in VB.

[Mike Petrichenko]

Exactly so!

$8000F000 (0x8000F000, H8000F000) is a hexadecimal value. It can be displayed as unsigned interger (2147545088) or as a signed interger (-2147422208). These are the same values (4 bytes integer).

[cyp]

When i reject a message it?s show WCL_ERROR_OBEX_SESSION_ERROR - 8000F032 what it?s means?

what is the error code when i reject a message?

[Mike Petrichenko]

There is no one error code for reject. The result code is hard depends on when and how the phone process the session. It may be WCL_ERROR_UNABLE_CONNECT or WCL_ERROR_OBEX_SESSION_ERROR or other